Addition reactions of pendant epoxide group in poly(glycidyl methacrylate) with various active esters

Addition reactions of pendant epoxide groups in poly(glycidyl methacrylate) (PGMA) with various active esters such as 1-benzotriazolyl benzoate, S-(2-benzoxazolyl) thiobenzoate, S-(2-benzothiazolyl) thiobenzoate, 4-nitrophenyl benzoate (4NPB), and S-phenyl thiobenzoate (PTB) were carried out using quaternary salts as catalysts. The reactions of PGMA with those active esters proceeded in diglyme at 100°C for 24 h quantitatively without the formation of 2-hydroxyl pendant groups in the polymer when 10 mol % of tetraethylammonium bromide was used as a catalyst. Furthermore, it was found that the respective quaternary salts have higher catalytic activity than tertiary amines in the reaction of PGMA with the active esters, and the reaction of PGMA with 4NPB gave the corresponding polymer with the highest conversion by addition of tetrabutylammonium bromide as a catalyst, while tetraethylammonium chloride showed the highest activity for the reaction of PGMA with PTB. In addition, the rate of reaction of PGMA with 4NPB was proportional to third order kinetics of the epoxide concentration, the ester concentration and the catalyst concentration as follows: ?d[Epoxide]/dt = ?[Ester]/dt = k₃[Epoxide] [Ester] [Catalyst].     

Polymerization of methacrylates. I. Polymerization reactivity of picryl methacrylate

The polymerization of picryl (PMA), 2,4-dinitrophenyl (2,4-DNMA),2,6-dinitrophenyl (2,6-DNMA), 2-methyl-4,6-dinitrophenyl (MDNMA), and 2,6-dimethylphenyl methacrylates (DMMA) was carried out in benzene at 60°C. PMA, 2,6-DNMA, and MDNMA did not undergo radical homopolymerization, while 2,4-DNMA and DMMA did. The results suggest that the growing radical readily attacks the oxygen atom of the nitro group at the 2 position of the terminal phenyl group due to the steric effect of the substituent at the 6 position, resulting in chain termination. PMA formed a charge-transfer complex with 2-naphthyl methacrylate (NMA). The stoichiometric composition of this complex was shown to be 1:1 molar complex. PMA was readily copolymerized with NMA. The amount of solvent affected the composition of the copolymer obtained at a given same mole fraction in feed. The results suggest that charge-transfer interaction between the ester groups affects the copolymerization mechanism.     

A new reforming process based on CH4 decomposition using a hydrogen-permeating membrane reactor

A new reforming process was studied using Ni/SiO₂ with a hydrogen-permeating membrane reactor. Nickel catalyst supported on SiO₂ is highly active for CH₄?H₂O?O₂ reaction in membrane reactor and the reaction close to CH₄+0.35O₂+1.3H₂O→CO₂+3.3H₂ proceeds at 873 K. Since the selectivity to carbon and CO₂ increased and decreased with decreasing contact time respectively, it is considered that the reaction was started by decomposition of CH₄ followed by oxidation of C and water shift reaction. Therefore, the reaction mechanism was different from so-called autothermal reforming (ATR) reaction.     

Deuterium relaxation time ofα-d-tryptophan included in cyclodextrin host molecules

Deuterium relaxation times ofd- andl--d-tryptophan included in -cyclodextrin derivatives were directly measured by deuterium NMR spectroscopy. The results showed that the molecular motion of the tryptophan molecule was strongly restricted even in the cavity of unmodified -cyclodextrin and the additional recognition groupings — ammonium and carboxylate — on -cyclodextrin did not affect the molecular motion of tryptophan, though the association constants were significantly enhanced.Deceased on March 22, 1987.     

Reactivity and Structural Properties of a Mechanochemically Treated Ag2O-V2O5 System in Relation to AgVO3 Polymorphs

Formation and chemical properties of amorphous AgVO₃, which was prepared by mechanochemical treatment of an Ag₂O-V₂O₅ mixture, and crystalline AgVO₃ were studied in relation to AgVO₃ polymorphs. A ball-milled sample of the mixture was assigned as a highly deformed β-AgVO₃ rather than the low density phase α-AgVO₃. Crystalline α-AgVO₃ and β-AgVO₃ were converted into deformed β-AgVO₃ by ball milling, which produced a clear change. δ-AgVO₃ is resistant to mechanical treatment and its structure was not markedly affected. The dissolved chemical species from the ball-milled sample precipitates to form α-AgVO₃ without a seeding crystal, but other polymorphs deposit if they are present; i.e., β-AgVO₃ and δ-AgVO₃ grow on the seeding crystal.     

Synthesis of the new chiral tridentate ligand bis(pyrid-2-ylethyl) menthylphosphine and its use in the palladium-catalyzed allylic alkylations

We describe the synthesis of a new asymmetric P,N,N′-tridentate ligand (bis(pyrid-2-ylethyl) menthylphosphine, BPEMP), containing two pyridyl rings and (1S,2R,5S)-menthylphosphino group. The ligand is obtained in five steps from natural abundant l-menthol. The coordination behavior of the ligand toward cationic (allylic)Pd(II) moiety and its first application in palladium-catalyzed asymmetric allylic alkylation are presented. Crystallographic and spectroscopic analyses reveal that [(η³-allylic)Pd(BPEMP)]⁺ complex forms only one isomer in the solid state as well as in solution.     

Development of direct fluorination technology for application to materials for lithium battery

Direct fluorination of 1,3-dioxolan-2-one with elemental fluorine was successfully carried out to provide 4-fluoro-1,3-dioxolan-2-one, which was expected as an additive for lithium ion secondary battery. 4-Fluoro-1,3-dioxolan-2-one was also further fluorinated with elemental fluorine to give three isomers of difluoro derivatives by the same methodology. Another topic is the preparation of trifluoromethanesulfonyl fluoride, an intermediate of lithium battery electrolyte, by the reaction of methanesulfonyl fluoride with elemental fluorine. The use of perfluoro-2-methylpentane as a solvent gave satisfactory selectivity of trifluoromethanesulfonyl fluoride.     

Molecular structures of endo[4+2]π and exo[6+4]π cycloadducts via cycloaddition reaction of n-ethoxycarbonylazepine with 2,5-dimethoxycarbonyl-3,4-diphenylcyclopentadienone

The cycloaddition reaction of N-ethoxycarbonyl-1H-azepine with 2,5-dimethoxycarbonyl-3,4-diphenylcyclopentadienone gave anti-endo [4+2]π and exo [6+4]π cycloadducts. These structures were fully identified by X-ray crystallographic techniques. Mechanism for their cycloaddition reactions are also discussed.     

Synthesis of a new donor, BEDT-HBDST and crystal structures, electrical and magnetic properties of (BEDT-HBDST)2MX4 (M=Fe, Ga, X=Cl, Br), where BEDT-HBDST=2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene

A novel conjugation-elongated bis(ethylenedithio)tetraselenafulvalene (BETS) type donor, 2,5-bis(4,5-ethylenedithio-1,3-diselenol-2-ylidene)-2,3,4,5-tetrahydrothiophene (BEDT-HBDST) and its magnetic and non-magnetic anion salts, (BEDT-HBDST)₂MX₄ (MX₄⁻=FeCl₄⁻, GaCl₄⁻, FeBr₄⁻ and GaBr₄⁻), were prepared. These four salts are isostructural and belong to the space group of P2/c. They showed semiconducting behavior with small activation energies (59-64 meV). The band structures of these salts are quasi one-dimensional and there is a midgap between the upper band and the lower band, since the degree of dimerization is significant in the stacking direction. The MX₄⁻ ions are located between the donor columns and near to the ethylenedithio moieties of the donor molecules. The magnetic susceptibilities of the FeCl₄⁻ and FeBr₄⁻ salts follow the Curie-Weiss law with Curie constants of 4.6 and 4.8 emu K mol⁻¹ (sum of the spins of S=5/2 and S=1/2) and negative Weiss temperatures of θ=−1.2 and −4.9 K, respectively, revealing a weak antiferromagnetic interaction of 3d spins of the FeCl₄⁻ and FeBr₄⁻ anions. The Fe?Fe (6.66-7.60 Å), Cl?Cl (4.81-4.82 Å) and Br?Br (4.74-4.77 Å) distances in the crystal structures of these salts are significantly long. Therefore, the direct magnetic interaction between the 3d spins of the nearest neighboring Fe³⁺ ions appears to be not readily accessible.     

Mössbauer study of semiconducting and ferrimagnetic fly ash-recycled glass

Summary Room temperature M?ssbauer spectrum of fly ash-recycled glass (FARG), prepared with more than 86 mass% of fly ash and less than 14 mass% of Fe₂O₃, comprises two types of doublets due to Fe(II) and Fe(III) of magnetite nanoparticles. Isothermal annealing of fly ash-recycled glass at 1100 °C for 60 minutes results in a precipitation of ferrimagnetic magnetite phase having an internal magnetic field of 46.4-48.2 T. When the Fe₂O₃ content is equal to or more than 14%, room temperature M?ssbauer spectrum of FARG shows a magnetic hyperfine structure due to a magnetite phase, in addition to two doublets due to Fe(II) and Fe(III). An increase in the electric conductivity is observed from the order of 10^-8 to 10^-6 S ^. cm^-1 after heat treatment at around the crystallization temperature. This can be ascribed to an improved step-by-step electron hopping from Fe(II) to Fe(III) of distorted FeO₄ tetrahedra in the three-dimensional glass network.